How to Calculate Your 1RM: Formulas and Examples
Learn how to calculate your one-rep max using Epley, Brzycki, and Lombardi formulas. Understand formula differences, accuracy ranges, and how to track e1RM progress over time.
Open 1RM CalculatorWhat is a One-Rep Max (1RM)?
Definition, importance, and why estimating beats testing
Your one-rep max (1RM) is the maximum weight you can lift for a single repetition with proper form. It represents the peak of your absolute strength for a specific movement — your squat 1RM, bench press 1RM, or deadlift 1RM. For competitive powerlifters, 1RM is the performance metric: meets are won by the lifter who totals the highest combined 1RM across squat, bench, and deadlift.
But testing your true 1RM every week is impractical — it is high-risk (injury potential spikes near maximum loads), high-fatigue (full recovery takes 5–7 days), and unnecessary for training purposes. This is why estimated 1RM (e1RM) exists: mathematical formulas that predict your 1RM from submaximal sets. You can estimate your 1RM from a set of 5 reps, track that estimate weekly, and only test a true 1RM every 8–12 weeks or at competition.
e1RM vs. Tested 1RM
The 1RM Calculator uses three proven formulas — Epley, Brzycki, and Lombardi — and displays all three results plus an average. Each formula has slightly different assumptions about the weight-rep relationship, so seeing all three outputs gives you a realistic range rather than a single misleading number.
The Three 1RM Formulas Explained
Epley, Brzycki, and Lombardi: how they work and when to use each
📐Epley Formula (1985)
Best for: Sets of 4–8 reps. Most commonly used formula in strength training.
Assumption: Each additional rep adds ~3.3% to the load required for 1RM.
Example: 140 kg × 5 reps = 140 × (1 + 5/30) = 140 × 1.167 = 163.3 kg
Tends to give slightly higher estimates than Brzycki for sets above 6 reps.
📊Brzycki Formula (1993)
Best for: Sets of 2–10 reps. Slightly more conservative than Epley.
Assumption: The load-rep relationship follows a specific non-linear curve based on regression analysis.
Example: 140 kg × 5 reps = 140 × (36 / (37−5)) = 140 × 1.125 = 157.5 kg
Often closer to tested 1RM for higher rep ranges (8–10 reps).
📈Lombardi Formula (1989)
Best for: Low rep sets (1–5 reps). Most conservative formula.
Assumption: Load capacity increases as a power function of reps performed.
Example: 140 kg × 5 reps = 140 × (5^0.10) = 140 × 1.175 = 164.5 kg
Tends to give the highest estimates for low rep sets (1–3 reps).
Which Formula Should I Use?
| Weight × Reps | Epley | Brzycki | Lombardi | Average |
|---|---|---|---|---|
| 100 kg × 3 | 110.0 kg | 105.9 kg | 114.5 kg | 110.1 kg |
| 140 kg × 5 | 163.3 kg | 157.5 kg | 164.5 kg | 161.8 kg |
| 120 kg × 8 | 152.0 kg | 148.1 kg | 143.1 kg | 147.7 kg |
| 90 kg × 10 | 120.0 kg | 110.8 kg | 112.6 kg | 114.5 kg |
How to Use the 1RM Calculator
Step-by-step guide to calculating and tracking your estimated 1RM
Complete a working set
Perform a set of 2–10 reps at a challenging intensity — ideally RPE 7.5–9.5 for best accuracy. The calculator works with any rep range, but accuracy peaks at 3–6 reps.
Enter weight and reps
In the LEFT panel (Your Lift): input the weight you lifted and the number of reps completed. Choose your unit (kg or lbs) using the toggle — the calculator handles both.
Review all three formulas
The calculator displays Epley, Brzycki, and Lombardi results simultaneously in the RIGHT panel. Compare them — if they differ by more than 5%, your rep count may be outside the optimal range.
Track the average over time
Log the average e1RM weekly. Rising e1RM = strength gains. Plateaued e1RM = maintenance. Falling e1RM = fatigue accumulation or detraining. Adjust your program based on the trend.
Accuracy Range
⚙️Calculator Controls Explained
- Unit Toggle (KG | LBS): Switch between kilograms and pounds. Located in navbar, syncs across all calculators.
- Weight Input: The load you lifted. Use +/− buttons for quick adjustments by your selected increment.
- Reps Slider (1–20): Number of reps completed. Optimal range: 2–10 reps for accurate predictions.
- Increment Dropdown: Choose rounding precision (0.5 kg, 1 kg, 2.5 kg, 5 kg for metric). Affects weight input step size.
- Calculate Button: Generates all three formulas plus average. Results appear instantly in the right panel.
- Reset Button: Clears all inputs and returns to defaults (100 kg / 225 lbs, 5 reps).
Worked Example: Tracking Bench Press 1RM Across 8 Weeks
Let's track bench press estimated 1RM across an 8-week strength block. The lifter tests e1RM weekly from their heaviest set, adjusting training load based on the trend.
Week 1: Baseline
Set: 90 kg × 5 reps
Epley: 105.0 kg | Brzycki: 101.3 kg | Lombardi: 105.8 kg
Average e1RM: 104.0 kg
Week 2: Volume Phase
Set: 85 kg × 8 reps @ RPE 8
Epley: 107.7 kg | Brzycki: 104.9 kg | Lombardi: 101.3 kg
Average e1RM: 104.6 kg (+0.6 kg)
Week 4: Intensity Rising
Set: 95 kg × 4 reps @ RPE 8.5
Epley: 107.7 kg | Brzycki: 106.6 kg | Lombardi: 109.3 kg
Average e1RM: 107.9 kg (+3.9 kg total)
Week 6: Strength Peak
Set: 100 kg × 3 reps @ RPE 9
Epley: 110.0 kg | Brzycki: 105.9 kg | Lombardi: 114.5 kg
Average e1RM: 110.1 kg (+6.1 kg total)
Week 8: 1RM Test (Competition Week)
Predicted e1RM: 110.1 kg
Tested 1RM: 107.5 kg
✓ Prediction accuracy: 97.6% (2.6 kg overestimate)
This level of accuracy (within 2–3%) confirms the formulas work well for this lifter's rep ranges and intensities.
Key Takeaway
Formula Accuracy: What the Science Says
Research on 1RM prediction formulas consistently shows 2–5% error for sets of 2–10 reps at high intensity (RPE 8–10). Accuracy depends on rep range, training experience, and fiber type distribution (fast-twitch vs slow-twitch dominant lifters respond differently to submaximal testing).
| Rep Range | Typical Error | Best Formula | Notes |
|---|---|---|---|
| 1–3 reps | ±1–2% | Lombardi | Most accurate range; very close to true 1RM |
| 4–6 reps | ±2–4% | Average | Optimal range for all formulas |
| 7–10 reps | ±3–6% | Brzycki | Still reliable; Brzycki edges Epley slightly |
| 11–15 reps | ±5–10% | Avoid | Muscle endurance dominates, poor predictor |
| 16+ reps | ±10%+ | Avoid | Extremely unreliable for 1RM prediction |
Fast-Twitch vs Slow-Twitch Lifters
Studies comparing Epley, Brzycki, and Lombardi show no single formula is universally superior — each performs best in different contexts. This is why the 1RM Calculator shows all three: the average compensates for individual formula biases and produces the most reliable estimate across varied rep ranges and lifter profiles.
Common Mistakes and How to Fix Them
Calculating e1RM from warm-up sets or technique work
Formulas require near-maximal effort (RPE 8+). Calculating e1RM from RPE 6–7 sets produces inflated estimates. Fix: Only calculate e1RM from your heaviest working sets of the day at RPE 8–9.5.
Using high-rep sets (12+ reps) for 1RM prediction
Above 10 reps, muscle endurance and lactic tolerance dominate over max strength. Formulas lose accuracy. Fix: Calculate e1RM from sets of 2–8 reps for best results.
Never testing a true 1RM to validate estimates
If you never test, you don not know if your e1RM is accurate. Fix: Test 1RM every 8–12 weeks or at a meet. Compare tested 1RM to recent e1RM estimates — if consistently off by 5%+, apply a correction factor.
Trusting a single formula instead of the average
Epley, Brzycki, and Lombardi each have biases. Epley overestimates high-rep sets; Lombardi overestimates low-rep sets. Fix: Use the average — it smooths out formula-specific error.
Ignoring declining e1RM week-over-week
If e1RM drops 3–5% over 2–3 weeks, you are accumulating fatigue or under-recovered. Fix: Program a deload or reduce training volume before continuing intensity progression.
Calculating e1RM from failed reps
If you attempted 5 reps but only completed 3, do not enter 5 reps — the formula assumes all reps were completed. Fix: Enter the actual reps completed (3), not the attempted reps (5).
Frequently Asked Questions
Related Guides
RPE Calculator Guide
Learn how to use an RPE calculator to find target training weights, read the RPE chart, and program by phase with practical examples.
Percentage Calculator Guide
Use the percentage of 1RM chart to program training loads. Learn percentage-to-reps relationships with examples and plate rounding.
Ready to Get Started?
Ready to calculate your estimated 1RM? Enter your lift details and compare all three formulas instantly.
Try the 1RM Calculator